All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x8 Flat Head Screws
Like putting on a fine suit, adding Thomson's X4 Dress Up Kit to your Thomson X4 stem (sold separately) helps you look your best for any riding occasion and stand out from the crowd. This cool kit includes an anodized faceplate and top cap, 6 silver bolts and 6 black bolts so you can customize the look of your front end and add some class to your ride.
• Aluminum clamp with a chromoly bolt
• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt
- Standard replacement cantilever/v-brake bosses
$7.99 - $15.99
- DT Swiss cartridge bearings - Sold in pairs
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
$4.99 - $19.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
- One-piece steel construction - Chrome plated
- Alloy construction - Push button adjustment - Fully adjustable length - -Includes: top plate and 2-bolts (1-hex, 1-Allen)
- Chrome allen seat binder bolt
• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip
$6.00 - $22.00
Flat Mount Disc Caliper Bracket Bolts
KITE dropper post adapters for top-left position, Shimano I-SPEC II. - Mount for Kite dropper seat post remote to Shimano I-Spec II control system - I-Spec II Mount only
- Ergonomic 1x lever - Compatible with the Turbine and Aeffect Dropper Posts - Standard shifter cable and housing
Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications
Seatpost clamp with integrated cover prevents dirt and mud from entering the frame at the seatpost junction - Chamfered edges and ovalized hole design protects carbon frames and seatposts - AL6061-T6 alloy clamp with NBR cover - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover - Compatible with both twist off and crimped style bottle caps - Bottle cap is held in place by two strong magnets - Easy to switch out bottle caps - AL6061 alloy cap and AL7075 alloy bolt
- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter
Standard replacement star nuts for threadless steerers.
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs
- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm
$1.00 - $16.20
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$10.49 - $15.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$10.99 - $15.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Page 1 of 2 Next page